Learning how to add thermal imaging to a standard home inspection starts with one simple step: ask your inspector for it before the inspection is booked. Thermal imaging (also called infrared thermography) is an optional add-on in which the inspector scans walls, ceilings, roofs, and electrical panels with an infrared camera to find temperature differences that the eye cannot see. Summertime Construction LLC, a Michigan licensed builder and InterNACHI-certified inspector, uses FLIR thermal imaging for this purpose in Northern Michigan.

Key Takeaways
- an infrared scan is usually an add-on, so request it when you schedule.
- It shows surface temperature patterns that can point to moisture, missing insulation, and electrical hot spots.
- It does not see through walls and does not replace a visual inspection.
- Conditions matter: a meaningful temperature difference between inside and outside gives the best results.
- Seasonal and lakeside homes in Northern Michigan benefit most from the added scan.
What Is Thermal Imaging in a Home Inspection?
Thermal imaging in a home inspection is a non-invasive scan that reads surface temperatures and displays them as a color image. In short, it helps an inspector spot anomalies that deserve a closer look. Examples include wet insulation, air leaks around windows, and overheated breaker connections. However, it is a screening tool. The inspector must confirm findings with other methods, such as a moisture meter or physical examination.
How to Add Thermal Imaging to Your Inspection: Step by Step
- Confirm that your inspector offers thermal imaging and uses a qualified infrared camera.
- Request the add-on when you book, not on inspection day, so time and equipment are planned.
- Ask about the fee and whether the thermal images are included in the written report.
- Share any concerns, such as past leaks, ice dams, or cold rooms, so the scan targets them.
- Schedule for a day with a noticeable indoor-outdoor temperature difference, as your inspector advises.
- Attend the walkthrough if you can, and review each flagged area with the inspector.
- Read the report, then follow up on flagged items with a licensed contractor.
What Thermal Imaging Can Find
A thermal camera is most helpful where problems hide behind finished surfaces. As a result, it pairs well with a standard visual inspection.
- Possible moisture intrusion in ceilings and walls
- Gaps or voids in insulation
- Air leakage at doors, windows, and rim joists
- Overheating at electrical panels and connections
- Patterns that suggest heating system or radiant floor issues
Standard Inspection vs. Inspection With Thermal Imaging
| Feature | Standard | With Thermal Imaging |
|---|---|---|
| Visual review of systems | Yes | Yes |
| Surface temperature mapping | No | Yes |
| Hidden moisture clues | Limited | Improved |
| Cost | Base fee | Base fee plus add-on |
Why It Matters for Northern Michigan Homes
Northern Michigan winters are long, and lakeside homes face humidity, snow load, and freeze-thaw cycles. Therefore, hidden moisture and insulation gaps can cause costly damage, especially in vacant seasonal properties. Summertime Construction pairs InterNACHI-certified inspections with Spectora digital reports, FLIR imaging, and DJI drone roof views. You can read more about whether thermal imaging is worth the cost or see how drone inspection compares to traditional roof inspections.
Local buyers can review inspection options for Harbor Springs and Petoskey, or start with the main home inspection page.
Limits to Understand Before You Add It
Thermal cameras read surfaces only. They cannot see through walls, and sunlight, recent rain, or a small temperature difference can distort results. Consequently, a good inspector treats each anomaly as a lead, not a verdict. The International Association of Certified Home Inspectors (InterNACHI) publishes standards and guidance for inspectors, and the U.S. Department of Energy explains how thermographic inspections work.
A thermal image points to where to look. A qualified inspector confirms what is actually there.
Frequently Asked Questions
Can I add thermal imaging after booking an inspection?
Often yes, but it is best to ask as early as possible. Equipment and timing need to be planned.
What is thermal imaging in a home inspection?
It is an infrared scan that shows surface temperature differences. Inspectors use it to flag possible moisture, insulation, and electrical issues.
Is it included in every inspection?
No. It is typically an optional service, so confirm what your inspection package covers.
How much does adding thermal imaging cost?
Pricing varies by inspector and home size. Ask for the add-on fee in writing when you book.
Does thermal imaging add time to the inspection?
It adds some time, since the inspector scans interior and exterior areas. The exact amount depends on the size and layout of the home.
Can an infrared camera see through walls?
No. It reads surface temperatures only, which can hint at conditions behind the surface.
What is the best time of year for a thermal scan?
Days with a clear difference between indoor and outdoor temperatures work best. In Northern Michigan, that is common in colder months.
Can thermal imaging find roof leaks?
It may reveal moisture patterns in ceilings or insulation that suggest a leak. Roof findings are usually confirmed with a visual or drone inspection.
Is thermal imaging worth it for a seasonal cottage?
Frequently, yes. Vacant homes can hide slow moisture problems for months.
What mistakes should I avoid when adding thermal imaging?
Do not treat the images as a final diagnosis, and do not schedule on a day with little temperature difference. Also confirm the images appear in your report.
Does Summertime Construction offer thermal imaging?
Yes. Its InterNACHI-certified inspections use FLIR thermal imaging. To ask about adding it, call (231) 498-5600 or visit summertimeconstruction.com.
In summary, the way to add an infrared scan to a standard home inspection is to request it at booking, choose a day with good conditions, and review each flagged area with your inspector. It improves what a visual inspection can detect, though it never replaces one. For Northern Michigan homeowners, Summertime Construction can add FLIR scanning to a certified inspection.
How to Add Thermal Imaging to Your Booking
You can add an infrared scan to most standard inspections with a simple request. For example, we explain what we found, show photos and point out what needs attention first. As a result, you can plan repairs with confidence.
In addition, our inspectors are InterNACHI certified and work for a Michigan licensed builder. Therefore, your inspector also knows how builders frame, roof and finish a home. To add an infrared scan to your inspection, call (231) 498-5600.
Further reading: Thermography (Wikipedia).